Collections

Introduction

The Hyperf\Collection\Collection class provides a fluent, convenient wrapper for working with arrays of data. For example, check out the following code. We'll use the collect helper to create a new collection instance from the array, run the strtoupper function on each element, and then remove all empty elements:

$collection = collect(['taylor', 'abigail', null])->map(function (?string $name) {
    return strtoupper($name);
})->reject(function (string $name) {
    return empty($name);
});

As you can see, the Collection class allows you to chain its methods to perform fluent mapping and reducing of the underlying array. In general, collections are immutable, meaning every Collection method returns an entirely new Collection instance.

Creating Collections

As mentioned above, the collect helper returns a new Hyperf\Collection\Collection instance for the given array. So, creating a collection is as simple as:

$collection = collect([1, 2, 3]);

Note

The results of Eloquent queries are always returned as Collection instances.

Extending Collections

Collections are "macroable", which allows you to add additional methods to the Collection class at run time. The Hyperf\Collection\Collection class' macro method accepts a closure that will be executed when your macro is called. The macro closure may access the collection's other methods via $this, just as if it were a real method of the collection class. For example, the following code adds a toUpper method to the Collection class:

use Hyperf\Collection\Collection;
use Hyperf\Stringable\Str;

Collection::macro('toUpper', function () {
    return $this->map(function (string $value) {
        return Str::upper($value);
    });
});

$collection = collect(['first', 'second']);

$upper = $collection->toUpper();

// ['FIRST', 'SECOND']

Typically, you should declare collection macros in the boot method of a service provider.

Macro Arguments

If necessary, you may define macros that accept additional arguments:

use Hyperf\Collection\Collection;
use SwooleTW\Hyperf\Support\Facades\Lang;

Collection::macro('toLocale', function (string $locale) {
    return $this->map(function (string $value) use ($locale) {
        return Lang::get($value, [], $locale);
    });
});

$collection = collect(['first', 'second']);

$translated = $collection->toLocale('es');

Available Methods

For the majority of the remaining collection documentation, we'll discuss each method available on the Collection class. Remember, all of these methods may be chained to fluently manipulate the underlying array. Furthermore, almost every method returns a new Collection instance, allowing you to preserve the original copy of the collection when necessary:

all average avg chunk chunkWhile collapse collect combine concat contains containsOneItem containsStrict count countBy crossJoin dd diff diffAssoc diffAssocUsing diffKeys doesntContain dot dump duplicates duplicatesStrict each eachSpread ensure every except filter first firstOrFail firstWhere flatMap flatten flip forget forPage get groupBy has hasAny implode intersect intersectAssoc intersectByKeys isEmpty isNotEmpty join keyBy keys last lazy macro make map mapInto mapSpread mapToGroups mapWithKeys max median merge mergeRecursive min mode nth only pad partition percentage pipe pipeInto pipeThrough pluck pop prepend pull push put random range reduce reduceSpread reject replace replaceRecursive reverse search select shift shuffle skip skipUntil skipWhile slice sliding sole some sort sortBy sortByDesc sortDesc sortKeys sortKeysDesc sortKeysUsing splice split splitIn sum take takeUntil takeWhile tap times toArray toJson transform undot union unique uniqueStrict unless unlessEmpty unlessNotEmpty unwrap value values when whenEmpty whenNotEmpty where whereStrict whereBetween whereIn whereInStrict whereInstanceOf whereNotBetween whereNotIn whereNotInStrict whereNotNull whereNull wrap zip

Method Listing

`all()` {.collection-method .first-collection-method}

The all method returns the underlying array represented by the collection:

collect([1, 2, 3])->all();

// [1, 2, 3]

`average()`

Alias for the avg method.

`avg()`

The avg method returns the average value of a given key:

$average = collect([
    ['foo' => 10],
    ['foo' => 10],
    ['foo' => 20],
    ['foo' => 40]
])->avg('foo');

// 20

$average = collect([1, 1, 2, 4])->avg();

// 2

`chunk()`

The chunk method breaks the collection into multiple, smaller collections of a given size:

$collection = collect([1, 2, 3, 4, 5, 6, 7]);

$chunks = $collection->chunk(4);

$chunks->all();

// [[1, 2, 3, 4], [5, 6, 7]]

This method is especially useful in views when working with a grid system such as Bootstrap. For example, imagine you have a collection of Eloquent models you want to display in a grid:

@foreach ($products->chunk(3) as $chunk)
    <div class="row">
        @foreach ($chunk as $product)
            <div class="col-xs-4">{{ $product->name }}</div>
        @endforeach
    </div>
@endforeach

`chunkWhile()`

The chunkWhile method breaks the collection into multiple, smaller collections based on the evaluation of the given callback. The $chunk variable passed to the closure may be used to inspect the previous element:

$collection = collect(str_split('AABBCCCD'));

$chunks = $collection->chunkWhile(function (string $value, int $key, Collection $chunk) {
    return $value === $chunk->last();
});

$chunks->all();

// [['A', 'A'], ['B', 'B'], ['C', 'C', 'C'], ['D']]

`collapse()`

The collapse method collapses a collection of arrays into a single, flat collection:

$collection = collect([
    [1, 2, 3],
    [4, 5, 6],
    [7, 8, 9],
]);

$collapsed = $collection->collapse();

$collapsed->all();

// [1, 2, 3, 4, 5, 6, 7, 8, 9]

`collect()`

The collect method returns a new Collection instance with the items currently in the collection:

$collectionA = collect([1, 2, 3]);

$collectionB = $collectionA->collect();

$collectionB->all();

// [1, 2, 3]

The collect method is primarily useful for converting lazy collections into standard Collection instances:

$lazyCollection = LazyCollection::make(function () {
    yield 1;
    yield 2;
    yield 3;
});

$collection = $lazyCollection->collect();

$collection::class;

// 'Hyperf\Collection\Collection'

$collection->all();

// [1, 2, 3]

Note

The collect method is especially useful when you have an instance of Enumerable and need a non-lazy collection instance. Since collect() is part of the Enumerable contract, you can safely use it to get a Collection instance.

`combine()`

The combine method combines the values of the collection, as keys, with the values of another array or collection:

$collection = collect(['name', 'age']);

$combined = $collection->combine(['George', 29]);

$combined->all();

// ['name' => 'George', 'age' => 29]

`concat()`

The concat method appends the given array or collection's values onto the end of another collection:

$collection = collect(['John Doe']);

$concatenated = $collection->concat(['Jane Doe'])->concat(['name' => 'Johnny Doe']);

$concatenated->all();

// ['John Doe', 'Jane Doe', 'Johnny Doe']

The concat method numerically reindexes keys for items concatenated onto the original collection. To maintain keys in associative collections, see the merge method.

`contains()`

The contains method determines whether the collection contains a given item. You may pass a closure to the contains method to determine if an element exists in the collection matching a given truth test:

$collection = collect([1, 2, 3, 4, 5]);

$collection->contains(function (int $value, int $key) {
    return $value > 5;
});

// false

Alternatively, you may pass a string to the contains method to determine whether the collection contains a given item value:

$collection = collect(['name' => 'Desk', 'price' => 100]);

$collection->contains('Desk');

// true

$collection->contains('New York');

// false

You may also pass a key / value pair to the contains method, which will determine if the given pair exists in the collection:

$collection = collect([
    ['product' => 'Desk', 'price' => 200],
    ['product' => 'Chair', 'price' => 100],
]);

$collection->contains('product', 'Bookcase');

// false

The contains method uses "loose" comparisons when checking item values, meaning a string with an integer value will be considered equal to an integer of the same value. Use the containsStrict method to filter using "strict" comparisons.

For the inverse of contains, see the doesntContain method.

`containsOneItem()`

The containsOneItem method determines whether the collection contains a single item:

collect([])->containsOneItem();

// false

collect(['1'])->containsOneItem();

// true

collect(['1', '2'])->containsOneItem();

// false

`containsStrict()`

This method has the same signature as the contains method; however, all values are compared using "strict" comparisons.

[!NOTE] This method's behavior is modified when using Eloquent Collections.

`count()`

The count method returns the total number of items in the collection:

$collection = collect([1, 2, 3, 4]);

$collection->count();

// 4

`countBy()`

The countBy method counts the occurrences of values in the collection. By default, the method counts the occurrences of every element, allowing you to count certain "types" of elements in the collection:

$collection = collect([1, 2, 2, 2, 3]);

$counted = $collection->countBy();

$counted->all();

// [1 => 1, 2 => 3, 3 => 1]

You pass a closure to the countBy method to count all items by a custom value:

$collection = collect(['[email protected]', '[email protected]', '[email protected]']);

$counted = $collection->countBy(function (string $email) {
    return substr(strrchr($email, "@"), 1);
});

$counted->all();

// ['gmail.com' => 2, 'yahoo.com' => 1]

`crossJoin()`

The crossJoin method cross joins the collection's values among the given arrays or collections, returning a Cartesian product with all possible permutations:

$collection = collect([1, 2]);

$matrix = $collection->crossJoin(['a', 'b']);

$matrix->all();

/*
    [
        [1, 'a'],
        [1, 'b'],
        [2, 'a'],
        [2, 'b'],
    ]
*/

$collection = collect([1, 2]);

$matrix = $collection->crossJoin(['a', 'b'], ['I', 'II']);

$matrix->all();

/*
    [
        [1, 'a', 'I'],
        [1, 'a', 'II'],
        [1, 'b', 'I'],
        [1, 'b', 'II'],
        [2, 'a', 'I'],
        [2, 'a', 'II'],
        [2, 'b', 'I'],
        [2, 'b', 'II'],
    ]
*/

`dd()`

The dd method dumps the collection's items and ends execution of the script:

$collection = collect(['John Doe', 'Jane Doe']);

$collection->dd();

/*
    Collection {
        #items: array:2 [
            0 => "John Doe"
            1 => "Jane Doe"
        ]
    }
*/

If you do not want to stop executing the script, use the dump method instead.

`diff()`

The diff method compares the collection against another collection or a plain PHP array based on its values. This method will return the values in the original collection that are not present in the given collection:

$collection = collect([1, 2, 3, 4, 5]);

$diff = $collection->diff([2, 4, 6, 8]);

$diff->all();

// [1, 3, 5]

Note

This method's behavior is modified when using Eloquent Collections.

`diffAssoc()`

The diffAssoc method compares the collection against another collection or a plain PHP array based on its keys and values. This method will return the key / value pairs in the original collection that are not present in the given collection:

$collection = collect([
    'color' => 'orange',
    'type' => 'fruit',
    'remain' => 6,
]);

$diff = $collection->diffAssoc([
    'color' => 'yellow',
    'type' => 'fruit',
    'remain' => 3,
    'used' => 6,
]);

$diff->all();

// ['color' => 'orange', 'remain' => 6]

`diffAssocUsing()`

Unlike diffAssoc, diffAssocUsing accepts a user supplied callback function for the indices comparison:

$collection = collect([
    'color' => 'orange',
    'type' => 'fruit',
    'remain' => 6,
]);

$diff = $collection->diffAssocUsing([
    'Color' => 'yellow',
    'Type' => 'fruit',
    'Remain' => 3,
], 'strnatcasecmp');

$diff->all();

// ['color' => 'orange', 'remain' => 6]

The callback must be a comparison function that returns an integer less than, equal to, or greater than zero. For more information, refer to the PHP documentation on array_diff_uassoc, which is the PHP function that the diffAssocUsing method utilizes internally.

`diffKeys()`

The diffKeys method compares the collection against another collection or a plain PHP array based on its keys. This method will return the key / value pairs in the original collection that are not present in the given collection:

$collection = collect([
    'one' => 10,
    'two' => 20,
    'three' => 30,
    'four' => 40,
    'five' => 50,
]);

$diff = $collection->diffKeys([
    'two' => 2,
    'four' => 4,
    'six' => 6,
    'eight' => 8,
]);

$diff->all();

// ['one' => 10, 'three' => 30, 'five' => 50]

`doesntContain()`

The doesntContain method determines whether the collection does not contain a given item. You may pass a closure to the doesntContain method to determine if an element does not exist in the collection matching a given truth test:

$collection = collect([1, 2, 3, 4, 5]);

$collection->doesntContain(function (int $value, int $key) {
    return $value < 5;
});

// false

Alternatively, you may pass a string to the doesntContain method to determine whether the collection does not contain a given item value:

$collection = collect(['name' => 'Desk', 'price' => 100]);

$collection->doesntContain('Table');

// true

$collection->doesntContain('Desk');

// false

You may also pass a key / value pair to the doesntContain method, which will determine if the given pair does not exist in the collection:

$collection = collect([
    ['product' => 'Desk', 'price' => 200],
    ['product' => 'Chair', 'price' => 100],
]);

$collection->doesntContain('product', 'Bookcase');

// true

The doesntContain method uses "loose" comparisons when checking item values, meaning a string with an integer value will be considered equal to an integer of the same value.

`dot()`

The dot method flattens a multi-dimensional collection into a single level collection that uses "dot" notation to indicate depth:

$collection = collect(['products' => ['desk' => ['price' => 100]]]);

$flattened = $collection->dot();

$flattened->all();

// ['products.desk.price' => 100]

`dump()`

The dump method dumps the collection's items:

$collection = collect(['John Doe', 'Jane Doe']);

$collection->dump();

/*
    Collection {
        #items: array:2 [
            0 => "John Doe"
            1 => "Jane Doe"
        ]
    }
*/

If you want to stop executing the script after dumping the collection, use the dd method instead.

`duplicates()`

The duplicates method retrieves and returns duplicate values from the collection:

$collection = collect(['a', 'b', 'a', 'c', 'b']);

$collection->duplicates();

// [2 => 'a', 4 => 'b']

If the collection contains arrays or objects, you can pass the key of the attributes that you wish to check for duplicate values:

$employees = collect([
    ['email' => '[email protected]', 'position' => 'Developer'],
    ['email' => '[email protected]', 'position' => 'Designer'],
    ['email' => '[email protected]', 'position' => 'Developer'],
]);

$employees->duplicates('position');

// [2 => 'Developer']

`duplicatesStrict()`

This method has the same signature as the duplicates method; however, all values are compared using "strict" comparisons.

`each()`

The each method iterates over the items in the collection and passes each item to a closure:

$collection = collect([1, 2, 3, 4]);

$collection->each(function (int $item, int $key) {
    // ...
});

If you would like to stop iterating through the items, you may return false from your closure:

$collection->each(function (int $item, int $key) {
    if (/* condition */) {
        return false;
    }
});

`eachSpread()`

The eachSpread method iterates over the collection's items, passing each nested item value into the given callback:

$collection = collect([['John Doe', 35], ['Jane Doe', 33]]);

$collection->eachSpread(function (string $name, int $age) {
    // ...
});

You may stop iterating through the items by returning false from the callback:

$collection->eachSpread(function (string $name, int $age) {
    return false;
});

`ensure()`

The ensure method may be used to verify that all elements of a collection are of a given type or list of types. Otherwise, an UnexpectedValueException will be thrown:

return $collection->ensure(User::class);

return $collection->ensure([User::class, Customer::class]);

Primitive types such as string, int, float, bool, and array may also be specified:

return $collection->ensure('int');

Warning

The ensure method does not guarantee that elements of different types will not be added to the collection at a later time.

`every()`

The every method may be used to verify that all elements of a collection pass a given truth test:

collect([1, 2, 3, 4])->every(function (int $value, int $key) {
    return $value > 2;
});

// false

If the collection is empty, the every method will return true:

$collection = collect([]);

$collection->every(function (int $value, int $key) {
    return $value > 2;
});

// true

`except()`

The except method returns all items in the collection except for those with the specified keys:

$collection = collect(['product_id' => 1, 'price' => 100, 'discount' => false]);

$filtered = $collection->except(['price', 'discount']);

$filtered->all();

// ['product_id' => 1]

For the inverse of except, see the only method.

Note

This method's behavior is modified when using Eloquent Collections.

`filter()`

The filter method filters the collection using the given callback, keeping only those items that pass a given truth test:

$collection = collect([1, 2, 3, 4]);

$filtered = $collection->filter(function (int $value, int $key) {
    return $value > 2;
});

$filtered->all();

// [3, 4]

If no callback is supplied, all entries of the collection that are equivalent to false will be removed:

$collection = collect([1, 2, 3, null, false, '', 0, []]);

$collection->filter()->all();

// [1, 2, 3]

For the inverse of filter, see the reject method.

`first()`

The first method returns the first element in the collection that passes a given truth test:

collect([1, 2, 3, 4])->first(function (int $value, int $key) {
    return $value > 2;
});

// 3

You may also call the first method with no arguments to get the first element in the collection. If the collection is empty, null is returned:

collect([1, 2, 3, 4])->first();

// 1

`firstOrFail()`

The firstOrFail method is identical to the first method; however, if no result is found, an Hyperf\Collection\ItemNotFoundException exception will be thrown:

collect([1, 2, 3, 4])->firstOrFail(function (int $value, int $key) {
    return $value > 5;
});

// Throws ItemNotFoundException...

You may also call the firstOrFail method with no arguments to get the first element in the collection. If the collection is empty, an Hyperf\Collection\ItemNotFoundException exception will be thrown:

collect([])->firstOrFail();

// Throws ItemNotFoundException...

`firstWhere()`

The firstWhere method returns the first element in the collection with the given key / value pair:

$collection = collect([
    ['name' => 'Regena', 'age' => null],
    ['name' => 'Linda', 'age' => 14],
    ['name' => 'Diego', 'age' => 23],
    ['name' => 'Linda', 'age' => 84],
]);

$collection->firstWhere('name', 'Linda');

// ['name' => 'Linda', 'age' => 14]

You may also call the firstWhere method with a comparison operator:

$collection->firstWhere('age', '>=', 18);

// ['name' => 'Diego', 'age' => 23]

Like the where method, you may pass one argument to the firstWhere method. In this scenario, the firstWhere method will return the first item where the given item key's value is "truthy":

$collection->firstWhere('age');

// ['name' => 'Linda', 'age' => 14]

`flatMap()`

The flatMap method iterates through the collection and passes each value to the given closure. The closure is free to modify the item and return it, thus forming a new collection of modified items. Then, the array is flattened by one level:

$collection = collect([
    ['name' => 'Sally'],
    ['school' => 'Arkansas'],
    ['age' => 28]
]);

$flattened = $collection->flatMap(function (array $values) {
    return array_map('strtoupper', $values);
});

$flattened->all();

// ['name' => 'SALLY', 'school' => 'ARKANSAS', 'age' => '28'];

`flatten()`

The flatten method flattens a multi-dimensional collection into a single dimension:

$collection = collect([
    'name' => 'taylor',
    'languages' => [
        'php', 'javascript'
    ]
]);

$flattened = $collection->flatten();

$flattened->all();

// ['taylor', 'php', 'javascript'];

If necessary, you may pass the flatten method a "depth" argument:

$collection = collect([
    'Apple' => [
        [
            'name' => 'iPhone 6S',
            'brand' => 'Apple'
        ],
    ],
    'Samsung' => [
        [
            'name' => 'Galaxy S7',
            'brand' => 'Samsung'
        ],
    ],
]);

$products = $collection->flatten(1);

$products->values()->all();

/*
    [
        ['name' => 'iPhone 6S', 'brand' => 'Apple'],
        ['name' => 'Galaxy S7', 'brand' => 'Samsung'],
    ]
*/

In this example, calling flatten without providing the depth would have also flattened the nested arrays, resulting in ['iPhone 6S', 'Apple', 'Galaxy S7', 'Samsung']. Providing a depth allows you to specify the number of levels nested arrays will be flattened.

`flip()`

The flip method swaps the collection's keys with their corresponding values:

$collection = collect(['language' => 'php', 'framework' => 'laravel hyperf']);

$flipped = $collection->flip();

$flipped->all();

// ['language' => 'php', 'laravel hyperf' => 'framework']

`forget()`

The forget method removes an item from the collection by its key:

$collection = collect(['language' => 'php', 'framework' => 'laravel hyperf']);

$collection->forget('language');

$collection->all();

// ['framework' => 'laravel hyperf']

Warning

Unlike most other collection methods, forget does not return a new modified collection; it modifies the collection it is called on.

`forPage()`

The forPage method returns a new collection containing the items that would be present on a given page number. The method accepts the page number as its first argument and the number of items to show per page as its second argument:

$collection = collect([1, 2, 3, 4, 5, 6, 7, 8, 9]);

$chunk = $collection->forPage(2, 3);

$chunk->all();

// [4, 5, 6]

`get()`

The get method returns the item at a given key. If the key does not exist, null is returned:

$collection = collect(['language' => 'php', 'framework' => 'laravel hyperf']);

$value = $collection->get('language');

// php

You may optionally pass a default value as the second argument:

$collection = collect(['language' => 'php', 'framework' => 'laravel hyperf']);

$value = $collection->get('age', 34);

// 34

You may even pass a callback as the method's default value. The result of the callback will be returned if the specified key does not exist:

    $collection->get('email', function () {
        return '[email protected]';
    });

    // [email protected]

`groupBy()`

The groupBy method groups the collection's items by a given key:

$collection = collect([
    ['account_id' => 'account-x10', 'product' => 'Chair'],
    ['account_id' => 'account-x10', 'product' => 'Bookcase'],
    ['account_id' => 'account-x11', 'product' => 'Desk'],
]);

$grouped = $collection->groupBy('account_id');

$grouped->all();

/*
    [
        'account-x10' => [
            ['account_id' => 'account-x10', 'product' => 'Chair'],
            ['account_id' => 'account-x10', 'product' => 'Bookcase'],
        ],
        'account-x11' => [
            ['account_id' => 'account-x11', 'product' => 'Desk'],
        ],
    ]
*/

Instead of passing a string key, you may pass a callback. The callback should return the value you wish to key the group by:

$grouped = $collection->groupBy(function (array $item, int $key) {
    return substr($item['account_id'], -3);
});

$grouped->all();

/*
    [
        'x10' => [
            ['account_id' => 'account-x10', 'product' => 'Chair'],
            ['account_id' => 'account-x10', 'product' => 'Bookcase'],
        ],
        'x11' => [
            ['account_id' => 'account-x11', 'product' => 'Desk'],
        ],
    ]
*/

Multiple grouping criteria may be passed as an array. Each array element will be applied to the corresponding level within a multi-dimensional array:

$data = new Collection([
    10 => ['user' => 1, 'skill' => 1, 'roles' => ['Role_1', 'Role_3']],
    20 => ['user' => 2, 'skill' => 1, 'roles' => ['Role_1', 'Role_2']],
    30 => ['user' => 3, 'skill' => 2, 'roles' => ['Role_1']],
    40 => ['user' => 4, 'skill' => 2, 'roles' => ['Role_2']],
]);

$result = $data->groupBy(['skill', function (array $item) {
    return $item['roles'];
}], preserveKeys: true);

/*
[
    1 => [
        'Role_1' => [
            10 => ['user' => 1, 'skill' => 1, 'roles' => ['Role_1', 'Role_3']],
            20 => ['user' => 2, 'skill' => 1, 'roles' => ['Role_1', 'Role_2']],
        ],
        'Role_2' => [
            20 => ['user' => 2, 'skill' => 1, 'roles' => ['Role_1', 'Role_2']],
        ],
        'Role_3' => [
            10 => ['user' => 1, 'skill' => 1, 'roles' => ['Role_1', 'Role_3']],
        ],
    ],
    2 => [
        'Role_1' => [
            30 => ['user' => 3, 'skill' => 2, 'roles' => ['Role_1']],
        ],
        'Role_2' => [
            40 => ['user' => 4, 'skill' => 2, 'roles' => ['Role_2']],
        ],
    ],
];
*/

`has()`

The has method determines if a given key exists in the collection:

$collection = collect(['account_id' => 1, 'product' => 'Desk', 'amount' => 5]);

$collection->has('product');

// true

$collection->has(['product', 'amount']);

// true

$collection->has(['amount', 'price']);

// false

`hasAny()`

The hasAny method determines whether any of the given keys exist in the collection:

$collection = collect(['account_id' => 1, 'product' => 'Desk', 'amount' => 5]);

$collection->hasAny(['product', 'price']);

// true

$collection->hasAny(['name', 'price']);

// false

`implode()`

The implode method joins items in a collection. Its arguments depend on the type of items in the collection. If the collection contains arrays or objects, you should pass the key of the attributes you wish to join, and the "glue" string you wish to place between the values:

$collection = collect([
    ['account_id' => 1, 'product' => 'Desk'],
    ['account_id' => 2, 'product' => 'Chair'],
]);

$collection->implode('product', ', ');

// Desk, Chair

If the collection contains simple strings or numeric values, you should pass the "glue" as the only argument to the method:

collect([1, 2, 3, 4, 5])->implode('-');

// '1-2-3-4-5'

You may pass a closure to the implode method if you would like to format the values being imploded:

$collection->implode(function (array $item, int $key) {
    return strtoupper($item['product']);
}, ', ');

// DESK, CHAIR

`intersect()`

The intersect method removes any values from the original collection that are not present in the given array or collection. The resulting collection will preserve the original collection's keys:

$collection = collect(['Desk', 'Sofa', 'Chair']);

$intersect = $collection->intersect(['Desk', 'Chair', 'Bookcase']);

$intersect->all();

// [0 => 'Desk', 2 => 'Chair']

Note

This method's behavior is modified when using Eloquent Collections.

`intersectAssoc()`

The intersectAssoc method compares the original collection against another collection or array, returning the key / value pairs that are present in all of the given collections:

$collection = collect([
    'color' => 'red',
    'size' => 'M',
    'material' => 'cotton'
]);

$intersect = $collection->intersectAssoc([
    'color' => 'blue',
    'size' => 'M',
    'material' => 'polyester'
]);

$intersect->all();

// ['size' => 'M']

`intersectByKeys()`

The intersectByKeys method removes any keys and their corresponding values from the original collection that are not present in the given array or collection:

$collection = collect([
    'serial' => 'UX301', 'type' => 'screen', 'year' => 2009,
]);

$intersect = $collection->intersectByKeys([
    'reference' => 'UX404', 'type' => 'tab', 'year' => 2011,
]);

$intersect->all();

// ['type' => 'screen', 'year' => 2009]

`isEmpty()`

The isEmpty method returns true if the collection is empty; otherwise, false is returned:

collect([])->isEmpty();

// true

`isNotEmpty()`

The isNotEmpty method returns true if the collection is not empty; otherwise, false is returned:

collect([])->isNotEmpty();

// false

`join()`

The join method joins the collection's values with a string. Using this method's second argument, you may also specify how the final element should be appended to the string:

collect(['a', 'b', 'c'])->join(', '); // 'a, b, c'
collect(['a', 'b', 'c'])->join(', ', ', and '); // 'a, b, and c'
collect(['a', 'b'])->join(', ', ' and '); // 'a and b'
collect(['a'])->join(', ', ' and '); // 'a'
collect([])->join(', ', ' and '); // ''

`keyBy()`

The keyBy method keys the collection by the given key. If multiple items have the same key, only the last one will appear in the new collection:

$collection = collect([
    ['product_id' => 'prod-100', 'name' => 'Desk'],
    ['product_id' => 'prod-200', 'name' => 'Chair'],
]);

$keyed = $collection->keyBy('product_id');

$keyed->all();

/*
    [
        'prod-100' => ['product_id' => 'prod-100', 'name' => 'Desk'],
        'prod-200' => ['product_id' => 'prod-200', 'name' => 'Chair'],
    ]
*/

You may also pass a callback to the method. The callback should return the value to key the collection by:

$keyed = $collection->keyBy(function (array $item, int $key) {
    return strtoupper($item['product_id']);
});

$keyed->all();

/*
    [
        'PROD-100' => ['product_id' => 'prod-100', 'name' => 'Desk'],
        'PROD-200' => ['product_id' => 'prod-200', 'name' => 'Chair'],
    ]
*/

`keys()`

The keys method returns all of the collection's keys:

$collection = collect([
    'prod-100' => ['product_id' => 'prod-100', 'name' => 'Desk'],
    'prod-200' => ['product_id' => 'prod-200', 'name' => 'Chair'],
]);

$keys = $collection->keys();

$keys->all();

// ['prod-100', 'prod-200']

`last()`

The last method returns the last element in the collection that passes a given truth test:

collect([1, 2, 3, 4])->last(function (int $value, int $key) {
    return $value < 3;
});

// 2

You may also call the last method with no arguments to get the last element in the collection. If the collection is empty, null is returned:

collect([1, 2, 3, 4])->last();

// 4

`lazy()`

The lazy method returns a new LazyCollection instance from the underlying array of items:

$lazyCollection = collect([1, 2, 3, 4])->lazy();

$lazyCollection::class;

// Hyperf\Collection\LazyCollection

$lazyCollection->all();

// [1, 2, 3, 4]

This is especially useful when you need to perform transformations on a huge Collection that contains many items:

$count = $hugeCollection
    ->lazy()
    ->where('country', 'FR')
    ->where('balance', '>', '100')
    ->count();

By converting the collection to a LazyCollection, we avoid having to allocate a ton of additional memory. Though the original collection still keeps its values in memory, the subsequent filters will not. Therefore, virtually no additional memory will be allocated when filtering the collection's results.

`macro()`

The static macro method allows you to add methods to the Collection class at run time. Refer to the documentation on extending collections for more information.

`make()`

The static make method creates a new collection instance. See the Creating Collections section.

`map()`

The map method iterates through the collection and passes each value to the given callback. The callback is free to modify the item and return it, thus forming a new collection of modified items:

$collection = collect([1, 2, 3, 4, 5]);

$multiplied = $collection->map(function (int $item, int $key) {
    return $item * 2;
});

$multiplied->all();

// [2, 4, 6, 8, 10]

Warning

Like most other collection methods, map returns a new collection instance; it does not modify the collection it is called on. If you want to transform the original collection, use the transform method.

`mapInto()`

The mapInto() method iterates over the collection, creating a new instance of the given class by passing the value into the constructor:

class Currency
{
    /**
     * Create a new currency instance.
     */
    function __construct(
        public string $code
    ) {}
}

$collection = collect(['USD', 'EUR', 'GBP']);

$currencies = $collection->mapInto(Currency::class);

$currencies->all();

// [Currency('USD'), Currency('EUR'), Currency('GBP')]

`mapSpread()`

The mapSpread method iterates over the collection's items, passing each nested item value into the given closure. The closure is free to modify the item and return it, thus forming a new collection of modified items:

$collection = collect([0, 1, 2, 3, 4, 5, 6, 7, 8, 9]);

$chunks = $collection->chunk(2);

$sequence = $chunks->mapSpread(function (int $even, int $odd) {
    return $even + $odd;
});

$sequence->all();

// [1, 5, 9, 13, 17]

`mapToGroups()`

The mapToGroups method groups the collection's items by the given closure. The closure should return an associative array containing a single key / value pair, thus forming a new collection of grouped values:

$collection = collect([
    [
        'name' => 'John Doe',
        'department' => 'Sales',
    ],
    [
        'name' => 'Jane Doe',
        'department' => 'Sales',
    ],
    [
        'name' => 'Johnny Doe',
        'department' => 'Marketing',
    ]
]);

$grouped = $collection->mapToGroups(function (array $item, int $key) {
    return [$item['department'] => $item['name']];
});

$grouped->all();

/*
    [
        'Sales' => ['John Doe', 'Jane Doe'],
        'Marketing' => ['Johnny Doe'],
    ]
*/

$grouped->get('Sales')->all();

// ['John Doe', 'Jane Doe']

`mapWithKeys()`

The mapWithKeys method iterates through the collection and passes each value to the given callback. The callback should return an associative array containing a single key / value pair:

$collection = collect([
    [
        'name' => 'John',
        'department' => 'Sales',
        'email' => '[email protected]',
    ],
    [
        'name' => 'Jane',
        'department' => 'Marketing',
        'email' => '[email protected]',
    ]
]);

$keyed = $collection->mapWithKeys(function (array $item, int $key) {
    return [$item['email'] => $item['name']];
});

$keyed->all();

/*
    [
        '[email protected]' => 'John',
        '[email protected]' => 'Jane',
    ]
*/

`max()`

The max method returns the maximum value of a given key:

$max = collect([
    ['foo' => 10],
    ['foo' => 20]
])->max('foo');

// 20

$max = collect([1, 2, 3, 4, 5])->max();

// 5

`median()`

The median method returns the median value of a given key:

$median = collect([
    ['foo' => 10],
    ['foo' => 10],
    ['foo' => 20],
    ['foo' => 40]
])->median('foo');

// 15

$median = collect([1, 1, 2, 4])->median();

// 1.5

`merge()`

The merge method merges the given array or collection with the original collection. If a string key in the given items matches a string key in the original collection, the given item's value will overwrite the value in the original collection:

$collection = collect(['product_id' => 1, 'price' => 100]);

$merged = $collection->merge(['price' => 200, 'discount' => false]);

$merged->all();

// ['product_id' => 1, 'price' => 200, 'discount' => false]

If the given item's keys are numeric, the values will be appended to the end of the collection:

$collection = collect(['Desk', 'Chair']);

$merged = $collection->merge(['Bookcase', 'Door']);

$merged->all();

// ['Desk', 'Chair', 'Bookcase', 'Door']

`mergeRecursive()`

The mergeRecursive method merges the given array or collection recursively with the original collection. If a string key in the given items matches a string key in the original collection, then the values for these keys are merged together into an array, and this is done recursively:

$collection = collect(['product_id' => 1, 'price' => 100]);

$merged = $collection->mergeRecursive([
    'product_id' => 2,
    'price' => 200,
    'discount' => false
]);

$merged->all();

// ['product_id' => [1, 2], 'price' => [100, 200], 'discount' => false]

`min()`

The min method returns the minimum value of a given key:

$min = collect([['foo' => 10], ['foo' => 20]])->min('foo');

// 10

$min = collect([1, 2, 3, 4, 5])->min();

// 1

`mode()`

The mode method returns the mode value of a given key:

$mode = collect([
    ['foo' => 10],
    ['foo' => 10],
    ['foo' => 20],
    ['foo' => 40]
])->mode('foo');

// [10]

$mode = collect([1, 1, 2, 4])->mode();

// [1]

$mode = collect([1, 1, 2, 2])->mode();

// [1, 2]

`nth()`

The nth method creates a new collection consisting of every n-th element:

$collection = collect(['a', 'b', 'c', 'd', 'e', 'f']);

$collection->nth(4);

// ['a', 'e']

You may optionally pass a starting offset as the second argument:

$collection->nth(4, 1);

// ['b', 'f']

`only()`

The only method returns the items in the collection with the specified keys:

$collection = collect([
    'product_id' => 1,
    'name' => 'Desk',
    'price' => 100,
    'discount' => false
]);

$filtered = $collection->only(['product_id', 'name']);

$filtered->all();

// ['product_id' => 1, 'name' => 'Desk']

For the inverse of only, see the except method.

Note

This method's behavior is modified when using Eloquent Collections.

`pad()`

The pad method will fill the array with the given value until the array reaches the specified size. This method behaves like the array_pad PHP function.

To pad to the left, you should specify a negative size. No padding will take place if the absolute value of the given size is less than or equal to the length of the array:

$collection = collect(['A', 'B', 'C']);

$filtered = $collection->pad(5, 0);

$filtered->all();

// ['A', 'B', 'C', 0, 0]

$filtered = $collection->pad(-5, 0);

$filtered->all();

// [0, 0, 'A', 'B', 'C']

`partition()`

The partition method may be combined with PHP array destructuring to separate elements that pass a given truth test from those that do not:

$collection = collect([1, 2, 3, 4, 5, 6]);

[$underThree, $equalOrAboveThree] = $collection->partition(function (int $i) {
    return $i < 3;
});

$underThree->all();

// [1, 2]

$equalOrAboveThree->all();

// [3, 4, 5, 6]

`percentage()`

The percentage method may be used to quickly determine the percentage of items in the collection that pass a given truth test:

$collection = collect([1, 1, 2, 2, 2, 3]);

$percentage = $collection->percentage(fn ($value) => $value === 1);

// 33.33

By default, the percentage will be rounded to two decimal places. However, you may customize this behavior by providing a second argument to the method:

$percentage = $collection->percentage(fn ($value) => $value === 1, precision: 3);

// 33.333

`pipe()`

The pipe method passes the collection to the given closure and returns the result of the executed closure:

$collection = collect([1, 2, 3]);

$piped = $collection->pipe(function (Collection $collection) {
    return $collection->sum();
});

// 6

`pipeInto()`

The pipeInto method creates a new instance of the given class and passes the collection into the constructor:

class ResourceCollection
{
    /**
     * Create a new ResourceCollection instance.
     */
    public function __construct(
        public Collection $collection,
    ) {}
}

$collection = collect([1, 2, 3]);

$resource = $collection->pipeInto(ResourceCollection::class);

$resource->collection->all();

// [1, 2, 3]

`pipeThrough()`

The pipeThrough method passes the collection to the given array of closures and returns the result of the executed closures:

use Hyperf\Collection\Collection;

$collection = collect([1, 2, 3]);

$result = $collection->pipeThrough([
    function (Collection $collection) {
        return $collection->merge([4, 5]);
    },
    function (Collection $collection) {
        return $collection->sum();
    },
]);

// 15

`pluck()`

The pluck method retrieves all of the values for a given key:

$collection = collect([
    ['product_id' => 'prod-100', 'name' => 'Desk'],
    ['product_id' => 'prod-200', 'name' => 'Chair'],
]);

$plucked = $collection->pluck('name');

$plucked->all();

// ['Desk', 'Chair']

You may also specify how you wish the resulting collection to be keyed:

$plucked = $collection->pluck('name', 'product_id');

$plucked->all();

// ['prod-100' => 'Desk', 'prod-200' => 'Chair']

The pluck method also supports retrieving nested values using "dot" notation:

$collection = collect([
    [
        'name' => 'Laracon',
        'speakers' => [
            'first_day' => ['Rosa', 'Judith'],
        ],
    ],
    [
        'name' => 'VueConf',
        'speakers' => [
            'first_day' => ['Abigail', 'Joey'],
        ],
    ],
]);

$plucked = $collection->pluck('speakers.first_day');

$plucked->all();

// [['Rosa', 'Judith'], ['Abigail', 'Joey']]

If duplicate keys exist, the last matching element will be inserted into the plucked collection:

$collection = collect([
    ['brand' => 'Tesla',  'color' => 'red'],
    ['brand' => 'Pagani', 'color' => 'white'],
    ['brand' => 'Tesla',  'color' => 'black'],
    ['brand' => 'Pagani', 'color' => 'orange'],
]);

$plucked = $collection->pluck('color', 'brand');

$plucked->all();

// ['Tesla' => 'black', 'Pagani' => 'orange']

`pop()`

The pop method removes and returns the last item from the collection:

$collection = collect([1, 2, 3, 4, 5]);

$collection->pop();

// 5

$collection->all();

// [1, 2, 3, 4]

You may pass an integer to the pop method to remove and return multiple items from the end of a collection:

$collection = collect([1, 2, 3, 4, 5]);

$collection->pop(3);

// collect([5, 4, 3])

$collection->all();

// [1, 2]

`prepend()`

The prepend method adds an item to the beginning of the collection:

$collection = collect([1, 2, 3, 4, 5]);

$collection->prepend(0);

$collection->all();

// [0, 1, 2, 3, 4, 5]

You may also pass a second argument to specify the key of the prepended item:

$collection = collect(['one' => 1, 'two' => 2]);

$collection->prepend(0, 'zero');

$collection->all();

// ['zero' => 0, 'one' => 1, 'two' => 2]

`pull()`

The pull method removes and returns an item from the collection by its key:

$collection = collect(['product_id' => 'prod-100', 'name' => 'Desk']);

$collection->pull('name');

// 'Desk'

$collection->all();

// ['product_id' => 'prod-100']

`push()`

The push method appends an item to the end of the collection:

$collection = collect([1, 2, 3, 4]);

$collection->push(5);

$collection->all();

// [1, 2, 3, 4, 5]

`put()`

The put method sets the given key and value in the collection:

$collection = collect(['product_id' => 1, 'name' => 'Desk']);

$collection->put('price', 100);

$collection->all();

// ['product_id' => 1, 'name' => 'Desk', 'price' => 100]

`random()`

The random method returns a random item from the collection:

$collection = collect([1, 2, 3, 4, 5]);

$collection->random();

// 4 - (retrieved randomly)

You may pass an integer to random to specify how many items you would like to randomly retrieve. A collection of items is always returned when explicitly passing the number of items you wish to receive:

$random = $collection->random(3);

$random->all();

// [2, 4, 5] - (retrieved randomly)

If the collection instance has fewer items than requested, the random method will throw an InvalidArgumentException.

The random method also accepts a closure, which will receive the current collection instance:

use Hyperf\Collection\Collection;

$random = $collection->random(fn (Collection $items) => min(10, count($items)));

$random->all();

// [1, 2, 3, 4, 5] - (retrieved randomly)

`range()`

The range method returns a collection containing integers between the specified range:

$collection = collect()->range(3, 6);

$collection->all();

// [3, 4, 5, 6]

`reduce()`

The reduce method reduces the collection to a single value, passing the result of each iteration into the subsequent iteration:

$collection = collect([1, 2, 3]);

$total = $collection->reduce(function (?int $carry, int $item) {
    return $carry + $item;
});

// 6

The value for $carry on the first iteration is null; however, you may specify its initial value by passing a second argument to reduce:

$collection->reduce(function (int $carry, int $item) {
    return $carry + $item;
}, 4);

// 10

The reduce method also passes array keys in associative collections to the given callback:

$collection = collect([
    'usd' => 1400,
    'gbp' => 1200,
    'eur' => 1000,
]);

$ratio = [
    'usd' => 1,
    'gbp' => 1.37,
    'eur' => 1.22,
];

$collection->reduce(function (int $carry, int $value, int $key) use ($ratio) {
    return $carry + ($value * $ratio[$key]);
});

// 4264

`reduceSpread()`

The reduceSpread method reduces the collection to an array of values, passing the results of each iteration into the subsequent iteration. This method is similar to the reduce method; however, it can accept multiple initial values:

[$creditsRemaining, $batch] = Image::where('status', 'unprocessed')
    ->get()
    ->reduceSpread(function (int $creditsRemaining, Collection $batch, Image $image) {
        if ($creditsRemaining >= $image->creditsRequired()) {
            $batch->push($image);

            $creditsRemaining -= $image->creditsRequired();
        }

        return [$creditsRemaining, $batch];
    }, $creditsAvailable, collect());

`reject()`

The reject method filters the collection using the given closure. The closure should return true if the item should be removed from the resulting collection:

$collection = collect([1, 2, 3, 4]);

$filtered = $collection->reject(function (int $value, int $key) {
    return $value > 2;
});

$filtered->all();

// [1, 2]

For the inverse of the reject method, see the filter method.

`replace()`

The replace method behaves similarly to merge; however, in addition to overwriting matching items that have string keys, the replace method will also overwrite items in the collection that have matching numeric keys:

$collection = collect(['Taylor', 'Abigail', 'James']);

$replaced = $collection->replace([1 => 'Victoria', 3 => 'Finn']);

$replaced->all();

// ['Taylor', 'Victoria', 'James', 'Finn']

`replaceRecursive()`

This method works like replace, but it will recur into arrays and apply the same replacement process to the inner values:

$collection = collect([
    'Taylor',
    'Abigail',
    [
        'James',
        'Victoria',
        'Finn'
    ]
]);

$replaced = $collection->replaceRecursive([
    'Charlie',
    2 => [1 => 'King']
]);

$replaced->all();

// ['Charlie', 'Abigail', ['James', 'King', 'Finn']]

`reverse()`

The reverse method reverses the order of the collection's items, preserving the original keys:

$collection = collect(['a', 'b', 'c', 'd', 'e']);

$reversed = $collection->reverse();

$reversed->all();

/*
    [
        4 => 'e',
        3 => 'd',
        2 => 'c',
        1 => 'b',
        0 => 'a',
    ]
*/

`search()`

The search method searches the collection for the given value and returns its key if found. If the item is not found, false is returned:

$collection = collect([2, 4, 6, 8]);

$collection->search(4);

// 1

The search is done using a "loose" comparison, meaning a string with an integer value will be considered equal to an integer of the same value. To use "strict" comparison, pass true as the second argument to the method:

collect([2, 4, 6, 8])->search('4', $strict = true);

// false

Alternatively, you may provide your own closure to search for the first item that passes a given truth test:

collect([2, 4, 6, 8])->search(function (int $item, int $key) {
    return $item > 5;
});

// 2

`select()`

The select method selects the given keys from the collection, similar to an SQL SELECT statement:

$users = collect([
    ['name' => 'Taylor Otwell', 'role' => 'Developer', 'status' => 'active'],
    ['name' => 'Victoria Faith', 'role' => 'Researcher', 'status' => 'active'],
]);

$users->select(['name', 'role']);

/*
    [
        ['name' => 'Taylor Otwell', 'role' => 'Developer'],
        ['name' => 'Victoria Faith', 'role' => 'Researcher'],
    ],
*/

`shift()`

The shift method removes and returns the first item from the collection:

$collection = collect([1, 2, 3, 4, 5]);

$collection->shift();

// 1

$collection->all();

// [2, 3, 4, 5]

You may pass an integer to the shift method to remove and return multiple items from the beginning of a collection:

$collection = collect([1, 2, 3, 4, 5]);

$collection->shift(3);

// collect([1, 2, 3])

$collection->all();

// [4, 5]

`shuffle()`

The shuffle method randomly shuffles the items in the collection:

$collection = collect([1, 2, 3, 4, 5]);

$shuffled = $collection->shuffle();

$shuffled->all();

// [3, 2, 5, 1, 4] - (generated randomly)

`skip()`

The skip method returns a new collection, with the given number of elements removed from the beginning of the collection:

$collection = collect([1, 2, 3, 4, 5, 6, 7, 8, 9, 10]);

$collection = $collection->skip(4);

$collection->all();

// [5, 6, 7, 8, 9, 10]

`skipUntil()`

The skipUntil method skips over items from the collection until the given callback returns true and then returns the remaining items in the collection as a new collection instance:

$collection = collect([1, 2, 3, 4]);

$subset = $collection->skipUntil(function (int $item) {
    return $item >= 3;
});

$subset->all();

// [3, 4]

You may also pass a simple value to the skipUntil method to skip all items until the given value is found:

$collection = collect([1, 2, 3, 4]);

$subset = $collection->skipUntil(3);

$subset->all();

// [3, 4]

Warning

If the given value is not found or the callback never returns true, the skipUntil method will return an empty collection.

`skipWhile()`

The skipWhile method skips over items from the collection while the given callback returns true and then returns the remaining items in the collection as a new collection:

$collection = collect([1, 2, 3, 4]);

$subset = $collection->skipWhile(function (int $item) {
    return $item <= 3;
});

$subset->all();

// [4]

Warning

If the callback never returns false, the skipWhile method will return an empty collection.

`slice()`

The slice method returns a slice of the collection starting at the given index:

$collection = collect([1, 2, 3, 4, 5, 6, 7, 8, 9, 10]);

$slice = $collection->slice(4);

$slice->all();

// [5, 6, 7, 8, 9, 10]

If you would like to limit the size of the returned slice, pass the desired size as the second argument to the method:

$slice = $collection->slice(4, 2);

$slice->all();

// [5, 6]

The returned slice will preserve keys by default. If you do not wish to preserve the original keys, you can use the values method to reindex them.

`sliding()`

The sliding method returns a new collection of chunks representing a "sliding window" view of the items in the collection:

$collection = collect([1, 2, 3, 4, 5]);

$chunks = $collection->sliding(2);

$chunks->toArray();

// [[1, 2], [2, 3], [3, 4], [4, 5]]

This is especially useful in conjunction with the eachSpread method:

    $transactions->sliding(2)->eachSpread(function (Collection $previous, Collection $current) {
        $current->total = $previous->total + $current->amount;
    });

You may optionally pass a second "step" value, which determines the distance between the first item of every chunk:

```php
$collection = collect([1, 2, 3, 4, 5]);

$chunks = $collection->sliding(3, step: 2);

$chunks->toArray();

// [[1, 2, 3], [3, 4, 5]]

`sole()`

The sole method returns the first element in the collection that passes a given truth test, but only if the truth test matches exactly one element:

collect([1, 2, 3, 4])->sole(function (int $value, int $key) {
    return $value === 2;
});

// 2

You may also pass a key / value pair to the sole method, which will return the first element in the collection that matches the given pair, but only if it exactly one element matches:

$collection = collect([
    ['product' => 'Desk', 'price' => 200],
    ['product' => 'Chair', 'price' => 100],
]);

$collection->sole('product', 'Chair');

// ['product' => 'Chair', 'price' => 100]

Alternatively, you may also call the sole method with no argument to get the first element in the collection if there is only one element:

$collection = collect([
    ['product' => 'Desk', 'price' => 200],
]);

$collection->sole();

// ['product' => 'Desk', 'price' => 200]

If there are no elements in the collection that should be returned by the sole method, an \Hyperf\Collection\ItemNotFoundException exception will be thrown. If there is more than one element that should be returned, an \Hyperf\Collection\MultipleItemsFoundException will be thrown.

`some()`

Alias for the contains method.

`sort()`

The sort method sorts the collection. The sorted collection keeps the original array keys, so in the following example we will use the values method to reset the keys to consecutively numbered indexes:

$collection = collect([5, 3, 1, 2, 4]);

$sorted = $collection->sort();

$sorted->values()->all();

// [1, 2, 3, 4, 5]

If your sorting needs are more advanced, you may pass a callback to sort with your own algorithm. Refer to the PHP documentation on uasort, which is what the collection's sort method calls utilizes internally.

Note

If you need to sort a collection of nested arrays or objects, see the sortBy and sortByDesc methods.

`sortBy()`

The sortBy method sorts the collection by the given key. The sorted collection keeps the original array keys, so in the following example we will use the values method to reset the keys to consecutively numbered indexes:

$collection = collect([
    ['name' => 'Desk', 'price' => 200],
    ['name' => 'Chair', 'price' => 100],
    ['name' => 'Bookcase', 'price' => 150],
]);

$sorted = $collection->sortBy('price');

$sorted->values()->all();

/*
    [
        ['name' => 'Chair', 'price' => 100],
        ['name' => 'Bookcase', 'price' => 150],
        ['name' => 'Desk', 'price' => 200],
    ]
*/

The sortBy method accepts sort flags as its second argument:

$collection = collect([
    ['title' => 'Item 1'],
    ['title' => 'Item 12'],
    ['title' => 'Item 3'],
]);

$sorted = $collection->sortBy('title', SORT_NATURAL);

$sorted->values()->all();

/*
    [
        ['title' => 'Item 1'],
        ['title' => 'Item 3'],
        ['title' => 'Item 12'],
    ]
*/

Alternatively, you may pass your own closure to determine how to sort the collection's values:

$collection = collect([
    ['name' => 'Desk', 'colors' => ['Black', 'Mahogany']],
    ['name' => 'Chair', 'colors' => ['Black']],
    ['name' => 'Bookcase', 'colors' => ['Red', 'Beige', 'Brown']],
]);

$sorted = $collection->sortBy(function (array $product, int $key) {
    return count($product['colors']);
});

$sorted->values()->all();

/*
    [
        ['name' => 'Chair', 'colors' => ['Black']],
        ['name' => 'Desk', 'colors' => ['Black', 'Mahogany']],
        ['name' => 'Bookcase', 'colors' => ['Red', 'Beige', 'Brown']],
    ]
*/

If you would like to sort your collection by multiple attributes, you may pass an array of sort operations to the sortBy method. Each sort operation should be an array consisting of the attribute that you wish to sort by and the direction of the desired sort:

$collection = collect([
    ['name' => 'Taylor Otwell', 'age' => 34],
    ['name' => 'Abigail Otwell', 'age' => 30],
    ['name' => 'Taylor Otwell', 'age' => 36],
    ['name' => 'Abigail Otwell', 'age' => 32],
]);

$sorted = $collection->sortBy([
    ['name', 'asc'],
    ['age', 'desc'],
]);

$sorted->values()->all();

/*
    [
        ['name' => 'Abigail Otwell', 'age' => 32],
        ['name' => 'Abigail Otwell', 'age' => 30],
        ['name' => 'Taylor Otwell', 'age' => 36],
        ['name' => 'Taylor Otwell', 'age' => 34],
    ]
*/

When sorting a collection by multiple attributes, you may also provide closures that define each sort operation:

$collection = collect([
    ['name' => 'Taylor Otwell', 'age' => 34],
    ['name' => 'Abigail Otwell', 'age' => 30],
    ['name' => 'Taylor Otwell', 'age' => 36],
    ['name' => 'Abigail Otwell', 'age' => 32],
]);

$sorted = $collection->sortBy([
    fn (array $a, array $b) => $a['name'] <=> $b['name'],
    fn (array $a, array $b) => $b['age'] <=> $a['age'],
]);

$sorted->values()->all();

/*
    [
        ['name' => 'Abigail Otwell', 'age' => 32],
        ['name' => 'Abigail Otwell', 'age' => 30],
        ['name' => 'Taylor Otwell', 'age' => 36],
        ['name' => 'Taylor Otwell', 'age' => 34],
    ]
*/

`sortByDesc()`

This method has the same signature as the sortBy method, but will sort the collection in the opposite order.

`sortDesc()`

This method will sort the collection in the opposite order as the sort method:

$collection = collect([5, 3, 1, 2, 4]);

$sorted = $collection->sortDesc();

$sorted->values()->all();

// [5, 4, 3, 2, 1]

Unlike sort, you may not pass a closure to sortDesc. Instead, you should use the sort method and invert your comparison.

`sortKeys()`

The sortKeys method sorts the collection by the keys of the underlying associative array:

$collection = collect([
    'id' => 22345,
    'first' => 'John',
    'last' => 'Doe',
]);

$sorted = $collection->sortKeys();

$sorted->all();

/*
    [
        'first' => 'John',
        'id' => 22345,
        'last' => 'Doe',
    ]
*/

`sortKeysDesc()`

This method has the same signature as the sortKeys method, but will sort the collection in the opposite order.

`sortKeysUsing()`

The sortKeysUsing method sorts the collection by the keys of the underlying associative array using a callback:

$collection = collect([
    'ID' => 22345,
    'first' => 'John',
    'last' => 'Doe',
]);

$sorted = $collection->sortKeysUsing('strnatcasecmp');

$sorted->all();

/*
    [
        'first' => 'John',
        'ID' => 22345,
        'last' => 'Doe',
    ]
*/

The callback must be a comparison function that returns an integer less than, equal to, or greater than zero. For more information, refer to the PHP documentation on uksort, which is the PHP function that sortKeysUsing method utilizes internally.

`splice()`

The splice method removes and returns a slice of items starting at the specified index:

$collection = collect([1, 2, 3, 4, 5]);

$chunk = $collection->splice(2);

$chunk->all();

// [3, 4, 5]

$collection->all();

// [1, 2]

You may pass a second argument to limit the size of the resulting collection:

$collection = collect([1, 2, 3, 4, 5]);

$chunk = $collection->splice(2, 1);

$chunk->all();

// [3]

$collection->all();

// [1, 2, 4, 5]

In addition, you may pass a third argument containing the new items to replace the items removed from the collection:

$collection = collect([1, 2, 3, 4, 5]);

$chunk = $collection->splice(2, 1, [10, 11]);

$chunk->all();

// [3]

$collection->all();

// [1, 2, 10, 11, 4, 5]

`split()`

The split method breaks a collection into the given number of groups:

$collection = collect([1, 2, 3, 4, 5]);

$groups = $collection->split(3);

$groups->all();

// [[1, 2], [3, 4], [5]]

`splitIn()`

The splitIn method breaks a collection into the given number of groups, filling non-terminal groups completely before allocating the remainder to the final group:

$collection = collect([1, 2, 3, 4, 5, 6, 7, 8, 9, 10]);

$groups = $collection->splitIn(3);

$groups->all();

// [[1, 2, 3, 4], [5, 6, 7, 8], [9, 10]]

`sum()`

The sum method returns the sum of all items in the collection:

collect([1, 2, 3, 4, 5])->sum();

// 15

If the collection contains nested arrays or objects, you should pass a key that will be used to determine which values to sum:

$collection = collect([
    ['name' => 'JavaScript: The Good Parts', 'pages' => 176],
    ['name' => 'JavaScript: The Definitive Guide', 'pages' => 1096],
]);

$collection->sum('pages');

// 1272

In addition, you may pass your own closure to determine which values of the collection to sum:

$collection = collect([
    ['name' => 'Chair', 'colors' => ['Black']],
    ['name' => 'Desk', 'colors' => ['Black', 'Mahogany']],
    ['name' => 'Bookcase', 'colors' => ['Red', 'Beige', 'Brown']],
]);

$collection->sum(function (array $product) {
    return count($product['colors']);
});

// 6

`take()`

The take method returns a new collection with the specified number of items:

$collection = collect([0, 1, 2, 3, 4, 5]);

$chunk = $collection->take(3);

$chunk->all();

// [0, 1, 2]

You may also pass a negative integer to take the specified number of items from the end of the collection:

$collection = collect([0, 1, 2, 3, 4, 5]);

$chunk = $collection->take(-2);

$chunk->all();

// [4, 5]

`takeUntil()`

The takeUntil method returns items in the collection until the given callback returns true:

$collection = collect([1, 2, 3, 4]);

$subset = $collection->takeUntil(function (int $item) {
    return $item >= 3;
});

$subset->all();

// [1, 2]

You may also pass a simple value to the takeUntil method to get the items until the given value is found:

$collection = collect([1, 2, 3, 4]);

$subset = $collection->takeUntil(3);

$subset->all();

// [1, 2]

Warning

If the given value is not found or the callback never returns true, the takeUntil method will return all items in the collection.

`takeWhile()`

The takeWhile method returns items in the collection until the given callback returns false:

$collection = collect([1, 2, 3, 4]);

$subset = $collection->takeWhile(function (int $item) {
    return $item < 3;
});

$subset->all();

// [1, 2]

Warning

If the callback never returns false, the takeWhile method will return all items in the collection.

`tap()`

The tap method passes the collection to the given callback, allowing you to "tap" into the collection at a specific point and do something with the items while not affecting the collection itself. The collection is then returned by the tap method:

collect([2, 4, 3, 1, 5])
    ->sort()
    ->tap(function (Collection $collection) {
        Log::debug('Values after sorting', $collection->values()->all());
    })
    ->shift();

// 1

`times()`

The static times method creates a new collection by invoking the given closure a specified number of times:

$collection = Collection::times(10, function (int $number) {
    return $number * 9;
});

$collection->all();

// [9, 18, 27, 36, 45, 54, 63, 72, 81, 90]

`toArray()`

The toArray method converts the collection into a plain PHP array. If the collection's values are Eloquent models, the models will also be converted to arrays:

$collection = collect(['name' => 'Desk', 'price' => 200]);

$collection->toArray();

/*
    [
        ['name' => 'Desk', 'price' => 200],
    ]
*/

Warning

toArray also converts all of the collection's nested objects that are an instance of Arrayable to an array. If you want to get the raw array underlying the collection, use the all method instead.

`toJson()`

The toJson method converts the collection into a JSON serialized string:

$collection = collect(['name' => 'Desk', 'price' => 200]);

$collection->toJson();

// '{"name":"Desk", "price":200}'

`transform()`

The transform method iterates over the collection and calls the given callback with each item in the collection. The items in the collection will be replaced by the values returned by the callback:

$collection = collect([1, 2, 3, 4, 5]);

$collection->transform(function (int $item, int $key) {
    return $item * 2;
});

$collection->all();

// [2, 4, 6, 8, 10]

Warning

Unlike most other collection methods, transform modifies the collection itself. If you wish to create a new collection instead, use the map method.

`undot()`

The undot method expands a single-dimensional collection that uses "dot" notation into a multi-dimensional collection:

$person = collect([
    'name.first_name' => 'Marie',
    'name.last_name' => 'Valentine',
    'address.line_1' => '2992 Eagle Drive',
    'address.line_2' => '',
    'address.suburb' => 'Detroit',
    'address.state' => 'MI',
    'address.postcode' => '48219'
]);

$person = $person->undot();

$person->toArray();

/*
    [
        "name" => [
            "first_name" => "Marie",
            "last_name" => "Valentine",
        ],
        "address" => [
            "line_1" => "2992 Eagle Drive",
            "line_2" => "",
            "suburb" => "Detroit",
            "state" => "MI",
            "postcode" => "48219",
        ],
    ]
*/

`union()`

The union method adds the given array to the collection. If the given array contains keys that are already in the original collection, the original collection's values will be preferred:

$collection = collect([1 => ['a'], 2 => ['b']]);

$union = $collection->union([3 => ['c'], 1 => ['d']]);

$union->all();

// [1 => ['a'], 2 => ['b'], 3 => ['c']]

`unique()`

The unique method returns all of the unique items in the collection. The returned collection keeps the original array keys, so in the following example we will use the values method to reset the keys to consecutively numbered indexes:

$collection = collect([1, 1, 2, 2, 3, 4, 2]);

$unique = $collection->unique();

$unique->values()->all();

// [1, 2, 3, 4]

When dealing with nested arrays or objects, you may specify the key used to determine uniqueness:

$collection = collect([
    ['name' => 'iPhone 6', 'brand' => 'Apple', 'type' => 'phone'],
    ['name' => 'iPhone 5', 'brand' => 'Apple', 'type' => 'phone'],
    ['name' => 'Apple Watch', 'brand' => 'Apple', 'type' => 'watch'],
    ['name' => 'Galaxy S6', 'brand' => 'Samsung', 'type' => 'phone'],
    ['name' => 'Galaxy Gear', 'brand' => 'Samsung', 'type' => 'watch'],
]);

$unique = $collection->unique('brand');

$unique->values()->all();

/*
    [
        ['name' => 'iPhone 6', 'brand' => 'Apple', 'type' => 'phone'],
        ['name' => 'Galaxy S6', 'brand' => 'Samsung', 'type' => 'phone'],
    ]
*/

Finally, you may also pass your own closure to the unique method to specify which value should determine an item's uniqueness:

$unique = $collection->unique(function (array $item) {
    return $item['brand'].$item['type'];
});

$unique->values()->all();

/*
    [
        ['name' => 'iPhone 6', 'brand' => 'Apple', 'type' => 'phone'],
        ['name' => 'Apple Watch', 'brand' => 'Apple', 'type' => 'watch'],
        ['name' => 'Galaxy S6', 'brand' => 'Samsung', 'type' => 'phone'],
        ['name' => 'Galaxy Gear', 'brand' => 'Samsung', 'type' => 'watch'],
    ]
*/

The unique method uses "loose" comparisons when checking item values, meaning a string with an integer value will be considered equal to an integer of the same value. Use the uniqueStrict method to filter using "strict" comparisons.

Note

This method's behavior is modified when using Eloquent Collections.

`uniqueStrict()`

This method has the same signature as the unique method; however, all values are compared using "strict" comparisons.

`unless()`

The unless method will execute the given callback unless the first argument given to the method evaluates to true:

$collection = collect([1, 2, 3]);

$collection->unless(true, function (Collection $collection) {
    return $collection->push(4);
});

$collection->unless(false, function (Collection $collection) {
    return $collection->push(5);
});

$collection->all();

// [1, 2, 3, 5]

A second callback may be passed to the unless method. The second callback will be executed when the first argument given to the unless method evaluates to true:

$collection = collect([1, 2, 3]);

$collection->unless(true, function (Collection $collection) {
    return $collection->push(4);
}, function (Collection $collection) {
    return $collection->push(5);
});

$collection->all();

// [1, 2, 3, 5]

For the inverse of unless, see the when method.

`unlessEmpty()`

Alias for the whenNotEmpty method.

`unlessNotEmpty()`

Alias for the whenEmpty method.

`unwrap()`

The static unwrap method returns the collection's underlying items from the given value when applicable:

Collection::unwrap(collect('John Doe'));

// ['John Doe']

Collection::unwrap(['John Doe']);

// ['John Doe']

Collection::unwrap('John Doe');

// 'John Doe'

`value()`

The value method retrieves a given value from the first element of the collection:

$collection = collect([
    ['product' => 'Desk', 'price' => 200],
    ['product' => 'Speaker', 'price' => 400],
]);

$value = $collection->value('price');

// 200

`values()`

The values method returns a new collection with the keys reset to consecutive integers:

$collection = collect([
    10 => ['product' => 'Desk', 'price' => 200],
    11 => ['product' => 'Desk', 'price' => 200],
]);

$values = $collection->values();

$values->all();

/*
    [
        0 => ['product' => 'Desk', 'price' => 200],
        1 => ['product' => 'Desk', 'price' => 200],
    ]
*/

`when()`

The when method will execute the given callback when the first argument given to the method evaluates to true. The collection instance and the first argument given to the when method will be provided to the closure:

$collection = collect([1, 2, 3]);

$collection->when(true, function (Collection $collection, int $value) {
    return $collection->push(4);
});

$collection->when(false, function (Collection $collection, int $value) {
    return $collection->push(5);
});

$collection->all();

// [1, 2, 3, 4]

A second callback may be passed to the when method. The second callback will be executed when the first argument given to the when method evaluates to false:

$collection = collect([1, 2, 3]);

$collection->when(false, function (Collection $collection, int $value) {
    return $collection->push(4);
}, function (Collection $collection) {
    return $collection->push(5);
});

$collection->all();

// [1, 2, 3, 5]

For the inverse of when, see the unless method.

`whenEmpty()`

The whenEmpty method will execute the given callback when the collection is empty:

$collection = collect(['Michael', 'Tom']);

$collection->whenEmpty(function (Collection $collection) {
    return $collection->push('Adam');
});

$collection->all();

// ['Michael', 'Tom']


$collection = collect();

$collection->whenEmpty(function (Collection $collection) {
    return $collection->push('Adam');
});

$collection->all();

// ['Adam']

A second closure may be passed to the whenEmpty method that will be executed when the collection is not empty:

$collection = collect(['Michael', 'Tom']);

$collection->whenEmpty(function (Collection $collection) {
    return $collection->push('Adam');
}, function (Collection $collection) {
    return $collection->push('Taylor');
});

$collection->all();

// ['Michael', 'Tom', 'Taylor']

For the inverse of whenEmpty, see the whenNotEmpty method.

`whenNotEmpty()`

The whenNotEmpty method will execute the given callback when the collection is not empty:

$collection = collect(['michael', 'tom']);

$collection->whenNotEmpty(function (Collection $collection) {
    return $collection->push('adam');
});

$collection->all();

// ['michael', 'tom', 'adam']


$collection = collect();

$collection->whenNotEmpty(function (Collection $collection) {
    return $collection->push('adam');
});

$collection->all();

// []

A second closure may be passed to the whenNotEmpty method that will be executed when the collection is empty:

$collection = collect();

$collection->whenNotEmpty(function (Collection $collection) {
    return $collection->push('adam');
}, function (Collection $collection) {
    return $collection->push('taylor');
});

$collection->all();

// ['taylor']

For the inverse of whenNotEmpty, see the whenEmpty method.

`where()`

The where method filters the collection by a given key / value pair:

$collection = collect([
    ['product' => 'Desk', 'price' => 200],
    ['product' => 'Chair', 'price' => 100],
    ['product' => 'Bookcase', 'price' => 150],
    ['product' => 'Door', 'price' => 100],
]);

$filtered = $collection->where('price', 100);

$filtered->all();

/*
    [
        ['product' => 'Chair', 'price' => 100],
        ['product' => 'Door', 'price' => 100],
    ]
*/

The where method uses "loose" comparisons when checking item values, meaning a string with an integer value will be considered equal to an integer of the same value. Use the whereStrict method to filter using "strict" comparisons.

Optionally, you may pass a comparison operator as the second parameter. Supported operators are: '===', '!==', '!=', '==', '=', '<>', '>', '<', '>=', and '<=':

$collection = collect([
    ['name' => 'Jim', 'deleted_at' => '2019-01-01 00:00:00'],
    ['name' => 'Sally', 'deleted_at' => '2019-01-02 00:00:00'],
    ['name' => 'Sue', 'deleted_at' => null],
]);

$filtered = $collection->where('deleted_at', '!=', null);

$filtered->all();

/*
    [
        ['name' => 'Jim', 'deleted_at' => '2019-01-01 00:00:00'],
        ['name' => 'Sally', 'deleted_at' => '2019-01-02 00:00:00'],
    ]
*/

`whereStrict()`

This method has the same signature as the where method; however, all values are compared using "strict" comparisons.

`whereBetween()`

The whereBetween method filters the collection by determining if a specified item value is within a given range:

$collection = collect([
    ['product' => 'Desk', 'price' => 200],
    ['product' => 'Chair', 'price' => 80],
    ['product' => 'Bookcase', 'price' => 150],
    ['product' => 'Pencil', 'price' => 30],
    ['product' => 'Door', 'price' => 100],
]);

$filtered = $collection->whereBetween('price', [100, 200]);

$filtered->all();

/*
    [
        ['product' => 'Desk', 'price' => 200],
        ['product' => 'Bookcase', 'price' => 150],
        ['product' => 'Door', 'price' => 100],
    ]
*/

`whereIn()`

The whereIn method removes elements from the collection that do not have a specified item value that is contained within the given array:

$collection = collect([
    ['product' => 'Desk', 'price' => 200],
    ['product' => 'Chair', 'price' => 100],
    ['product' => 'Bookcase', 'price' => 150],
    ['product' => 'Door', 'price' => 100],
]);

$filtered = $collection->whereIn('price', [150, 200]);

$filtered->all();

/*
    [
        ['product' => 'Desk', 'price' => 200],
        ['product' => 'Bookcase', 'price' => 150],
    ]
*/

The whereIn method uses "loose" comparisons when checking item values, meaning a string with an integer value will be considered equal to an integer of the same value. Use the whereInStrict method to filter using "strict" comparisons.

`whereInStrict()`

This method has the same signature as the whereIn method; however, all values are compared using "strict" comparisons.

`whereInstanceOf()`

The whereInstanceOf method filters the collection by a given class type:

use App\Models\User;
use App\Models\Post;

$collection = collect([
    new User,
    new User,
    new Post,
]);

$filtered = $collection->whereInstanceOf(User::class);

$filtered->all();

// [App\Models\User, App\Models\User]

`whereNotBetween()`

The whereNotBetween method filters the collection by determining if a specified item value is outside of a given range:

$collection = collect([
    ['product' => 'Desk', 'price' => 200],
    ['product' => 'Chair', 'price' => 80],
    ['product' => 'Bookcase', 'price' => 150],
    ['product' => 'Pencil', 'price' => 30],
    ['product' => 'Door', 'price' => 100],
]);

$filtered = $collection->whereNotBetween('price', [100, 200]);

$filtered->all();

/*
    [
        ['product' => 'Chair', 'price' => 80],
        ['product' => 'Pencil', 'price' => 30],
    ]
*/

`whereNotIn()`

The whereNotIn method removes elements from the collection that have a specified item value that is contained within the given array:

$collection = collect([
    ['product' => 'Desk', 'price' => 200],
    ['product' => 'Chair', 'price' => 100],
    ['product' => 'Bookcase', 'price' => 150],
    ['product' => 'Door', 'price' => 100],
]);

$filtered = $collection->whereNotIn('price', [150, 200]);

$filtered->all();

/*
    [
        ['product' => 'Chair', 'price' => 100],
        ['product' => 'Door', 'price' => 100],
    ]
*/

The whereNotIn method uses "loose" comparisons when checking item values, meaning a string with an integer value will be considered equal to an integer of the same value. Use the whereNotInStrict method to filter using "strict" comparisons.

`whereNotInStrict()`

This method has the same signature as the whereNotIn method; however, all values are compared using "strict" comparisons.

`whereNotNull()`

The whereNotNull method returns items from the collection where the given key is not null:

$collection = collect([
    ['name' => 'Desk'],
    ['name' => null],
    ['name' => 'Bookcase'],
]);

$filtered = $collection->whereNotNull('name');

$filtered->all();

/*
    [
        ['name' => 'Desk'],
        ['name' => 'Bookcase'],
    ]
*/

`whereNull()`

The whereNull method returns items from the collection where the given key is null:

$collection = collect([
    ['name' => 'Desk'],
    ['name' => null],
    ['name' => 'Bookcase'],
]);

$filtered = $collection->whereNull('name');

$filtered->all();

/*
    [
        ['name' => null],
    ]
*/

`wrap()`

The static wrap method wraps the given value in a collection when applicable:

use Hyperf\Collection\Collection;

$collection = Collection::wrap('John Doe');

$collection->all();

// ['John Doe']

$collection = Collection::wrap(['John Doe']);

$collection->all();

// ['John Doe']

$collection = Collection::wrap(collect('John Doe'));

$collection->all();

// ['John Doe']

`zip()`

The zip method merges together the values of the given array with the values of the original collection at their corresponding index:

$collection = collect(['Chair', 'Desk']);

$zipped = $collection->zip([100, 200]);

$zipped->all();

// [['Chair', 100], ['Desk', 200]]

Higher Order Messages

Collections also provide support for "higher order messages", which are short-cuts for performing common actions on collections. The collection methods that provide higher order messages are: average, avg, contains, each, every, filter, first, flatMap, groupBy, keyBy, map, max, min, partition, reject, skipUntil, skipWhile, some, sortBy, sortByDesc, sum, takeUntil, takeWhile, and unique.

Each higher order message can be accessed as a dynamic property on a collection instance. For instance, let's use the each higher order message to call a method on each object within a collection:

use App\Models\User;

$users = User::where('votes', '>', 500)->get();

$users->each->markAsVip();

Likewise, we can use the sum higher order message to gather the total number of "votes" for a collection of users:

$users = User::where('group', 'Development')->get();

return $users->sum->votes;

Lazy Collections

Introduction

Warning

Before learning more about Laravel's lazy collections, take some time to familiarize yourself with PHP generators.

To supplement the already powerful Collection class, the LazyCollection class leverages PHP's generators to allow you to work with very large datasets while keeping memory usage low.

For example, imagine your application needs to process a multi-gigabyte log file while taking advantage of Laravel's collection methods to parse the logs. Instead of reading the entire file into memory at once, lazy collections may be used to keep only a small part of the file in memory at a given time:

use App\Models\LogEntry;
use Hyperf\Collection\LazyCollection;

LazyCollection::make(function () {
    $handle = fopen('log.txt', 'r');

    while (($line = fgets($handle)) !== false) {
        yield $line;
    }
})->chunk(4)->map(function (array $lines) {
    return LogEntry::fromLines($lines);
})->each(function (LogEntry $logEntry) {
    // Process the log entry...
});

Or, imagine you need to iterate through 10,000 Eloquent models. When using traditional Laravel collections, all 10,000 Eloquent models must be loaded into memory at the same time:

use App\Models\User;

$users = User::all()->filter(function (User $user) {
    return $user->id > 500;
});

However, the query builder's cursor method returns a LazyCollection instance. This allows you to still only run a single query against the database but also only keep one Eloquent model loaded in memory at a time. In this example, the filter callback is not executed until we actually iterate over each user individually, allowing for a drastic reduction in memory usage:

use App\Models\User;

$users = User::cursor()->filter(function (User $user) {
    return $user->id > 500;
});

foreach ($users as $user) {
    echo $user->id;
}

Creating Lazy Collections

To create a lazy collection instance, you should pass a PHP generator function to the collection's make method:

use Hyperf\Collection\LazyCollection;

LazyCollection::make(function () {
    $handle = fopen('log.txt', 'r');

    while (($line = fgets($handle)) !== false) {
        yield $line;
    }
});

The Enumerable Contract

Almost all methods available on the Collection class are also available on the LazyCollection class. Both of these classes implement the Hyperf\Collection\Enumerable contract, which defines the following methods:

Warning

Methods that mutate the collection (such as shift, pop, prepend etc.) are not available on the LazyCollection class.

Lazy Collection Methods

In addition to the methods defined in the Enumerable contract, the LazyCollection class contains the following methods:

`takeUntilTimeout()`

The takeUntilTimeout method returns a new lazy collection that will enumerate values until the specified time. After that time, the collection will then stop enumerating:

$lazyCollection = LazyCollection::times(INF)
    ->takeUntilTimeout(now()->addMinute());

$lazyCollection->each(function (int $number) {
    dump($number);

    sleep(1);
});

// 1
// 2
// ...
// 58
// 59

To illustrate the usage of this method, imagine an application that submits invoices from the database using a cursor. You could define a scheduled task that runs every 15 minutes and only processes invoices for a maximum of 14 minutes:

use App\Models\Invoice;
use Carbon\Carbon;

Invoice::pending()->cursor()
    ->takeUntilTimeout(
        Carbon::createFromTimestamp(LARAVEL_START)->add(14, 'minutes')
    )
    ->each(fn (Invoice $invoice) => $invoice->submit());

`tapEach()`

While the each method calls the given callback for each item in the collection right away, the tapEach method only calls the given callback as the items are being pulled out of the list one by one:

// Nothing has been dumped so far...
$lazyCollection = LazyCollection::times(INF)->tapEach(function (int $value) {
    dump($value);
});

// Three items are dumped...
$array = $lazyCollection->take(3)->all();

// 1
// 2
// 3

`remember()`

The remember method returns a new lazy collection that will remember any values that have already been enumerated and will not retrieve them again on subsequent collection enumerations:

// No query has been executed yet...
$users = User::cursor()->remember();

// The query is executed...
// The first 5 users are hydrated from the database...
$users->take(5)->all();

// First 5 users come from the collection's cache...
// The rest are hydrated from the database...
$users->take(20)->all();